ゴーリン・クロスヘッド・ベアリング スペアパーツ

Gaulin Crosshead Bearings – Frame Drive Components for High-Pressure Homogenisers

Looking for high-performance Gaulin crosshead bearings? Bos Homogenisers supplies OEM-compatible crosshead bearings for Gaulin homogenisers, ensuring smooth drive motion and long-term durability of the machine’s frame assembly. These bearings are critical to maintaining alignment and force transfer between the crankshaft and plungers.

Crosshead bearings operate under constant load and repetitive motion. They must be replaced periodically to avoid mechanical failure, misalignment, and damage to seals and pump components.

What Are Gaulin Crosshead Bearings?

Gaulin crosshead bearings are specialized sliding or rolling elements positioned between the connecting rod and the plunger guide block (crosshead). Their function is to support and guide the linear reciprocating motion of the plungers while absorbing side loads from the crankshaft rotation.

They serve as a stabilizing interface, ensuring that the axial force generated by the crank is precisely aligned with the plunger axis. This reduces wear, vibration, and stress on critical components.

Role of Crosshead Bearings in Gaulin Homogenisers

• Stabilize reciprocating plunger movement
• Absorb and distribute radial and axial forces
• Reduce friction and wear within the drive system
• Maintain alignment between crank, rod, and plunger
• Protect seals, plungers, and cylinder bores from damage

Well-functioning crosshead bearings help ensure smooth, quiet, and vibration-free operation, especially in continuous production environments.

Construction and Materials

Gaulin crosshead bearings are engineered for high loads and sliding contact conditions. Common features include:

• Precision-machined steel or bronze housings
• Self-lubricating bushings or needle bearings
• Anti-friction coatings or composite liners
• High wear resistance for long service intervals

The design may vary based on Gaulin model and generation, including split bearing assemblies or integrated guide block systems.

Symptoms of Worn Crosshead Bearings

Operators and maintenance technicians should monitor for these signs of crosshead bearing wear:

• Excessive vibration or knocking in the frame
• Uneven plunger motion or resistance
• Premature seal or packing failure
• Visible scoring or play in the crosshead assembly
• Increased operating noise from crank or plunger end

Failure to address worn bearings can result in plunger misalignment, rod fracture, or major frame repair.

When Should Crosshead Bearings Be Replaced?

Crosshead bearings are typically replaced as part of major frame overhauls or during vibration diagnostics. Replacement may be required:

• Every 4,000–10,000 operating hours, depending on load and speed
• During connecting rod or plunger rod replacement
• When realignment or excessive wear is detected
• If oil analysis shows increased bearing material in circulation

Bos Homogenisers provides both standard and oversize bearings based on wear tolerance and measurement results.

Compatibility with Gaulin Models

We supply crosshead bearings and assemblies for various Gaulin homogeniser models, including:

• Gaulin MC15, MC45, MC100, MC200, MC400
• Older APV Gaulin machines still in use globally
• Customised or retrofitted systems with modified crank designs

Bearings are identified by machine model, serial number, and shaft dimension. We can assist in confirming dimensions if needed.

Installation Tips for Crosshead Bearings

• Inspect the crosshead guide block for wear or damage
• Ensure smooth fit and precise alignment during assembly
• Lubricate bearing surfaces as per specification
• Torque bolts to recommended spec using calibrated tools
• After installation, test for vibration and smooth operation

Proper installation preserves machine balance and helps extend the life of plungers, seals, and valve seats.

Maintenance Guidelines

To maximize the service life of your Gaulin crosshead bearings:

• Monitor frame vibration and bearing temperature
• Use high-quality lubrication and monitor oil condition
• Follow OEM service intervals for inspection and replacement
• Check for plunger alignment during each seal kit change

Proactive maintenance avoids unexpected bearing failures and costly downtime.

Gaulin Machines for Which We Deliver Spare Parts

Bos Homogenisers supplies spare parts support for Gaulin homogenisers, including liquid end components and drive-end parts required for maintenance and overhaul. If you provide your Gaulin model and (when available) serial number, our team can help identify the correct spare parts and compatible configurations for your machine.

Bosのホモジナイザーを選ぶ理由

Bos Homogenisers is a global supplier of aftermarket spare parts for Gaulin machines. We provide:

• OEM-compatible Gaulin crosshead bearings
• Expert fitment support using model and serial number
• Fast lead times and global distribution
• Complete frame rebuild kits including bearings, seals, and rods

All bearings are engineered for long service life under the high loads typical in homogenisation systems.

How to Order Gaulin Crosshead Bearings

Ordering is simple and fast with Bos Homogenisers:

1. Send your machine’s model and serial number
2. Confirm current condition and configuration of the frame
3. We identify the correct bearing set and provide a quote
4. Global delivery with full support

We also offer installation tools, lubrication recommendations, and inspection protocols on request.

見積依頼

If you need reliable Gaulin crosshead bearings for your homogeniser frame assembly, Bos Homogenisers is your trusted aftermarket supplier for precision-engineered parts.

メールアドレス：info@boshomogenisers.com

電話番号：+31 (0)123 456 789

Request a Quote for Gaulin Crosshead Bearings

関連するGaulin製スペアパーツ

その他のGaulinホモジナイザーのスペアパーツをお探しですか？当社のGaulin交換用部品全ラインナップをご覧ください：

• ゴーリン製コネクティングロッドベアリング – コネクティングロッドベアリング
• ゴーリンシリンダーブロック – 高精度シリンダーブロック
• ゴーリン計装 – Gauges, sensors, and instruments
• ゴーリン油圧システム – Hydraulic system components
• ゴーリンPAリング – PA rings for sealing systems

Gaulinのスペアパーツをすべて見る →

他社製の互換製品

Looking for crosshead bearings for other homogeniser brands? BOS Homogenisers supplies compatible replacements across all major brands:

ボスホモジナイザークロスヘッドベアリング | ラニークロスヘッドベアリング | APVクロスヘッド・ベアリング | SPXクロスヘッドベアリング

連絡先