Asientos de válvulas SPX Piezas de recambio

SPX Valve Seats – Homogenising and Pump Valve Seat Replacements for SPX Machines

Need high-quality replacement SPX valve seats for your homogeniser or pump system? Bos Homogenisers supplies a wide range of OEM-compatible valve seat components for SPX Flow systems, including micro-gap designs, carbide seats, and impact ring assemblies. These parts are engineered for performance, longevity, and exact fit within high-pressure homogenising heads.

Whether you’re replacing a worn SPX homogenising valve seat or upgrading to a carbide valve seat SPX for extended durability, we can supply parts globally with expert support and technical precision.

If you are searching for specific SPX valve seat article numbers or want to verify which parts match your homogeniser, you can consult our complete spare parts overview at homo valve componentes.

What Is an SPX Valve Seat?

An SPX valve seat is a critical sealing surface component located inside the valve assembly of a homogeniser or high-pressure pump. It provides the contact surface for the valve element (ball, poppet, or disc) to close against during the pressurisation cycle. Proper function of the SPX valve seat ensures fluid control, system pressure, and product integrity.

Each SPX valve seat is designed to work with the associated valve element and housing geometry. Material and surface finish are key factors in seat performance and longevity.

SPX Homogenising Valve Seat Options

SPX homogenising valve seat components are typically used within the high-pressure valve block of the homogeniser head. These seats are exposed to repetitive high-impact loads and must withstand intense cavitation, vibration, and fluid velocity.

Common features of SPX homogenising valve seat designs:

Precision-machined sealing surfaces
Carbide or hardened steel for wear resistance
Exact fit for valve body and impact ring alignment

Each SPX homogenising valve seat is matched to the valve type, product viscosity, and operating pressure range.

SPX Flow Micro-Gap Valve Seat

The SPX Flow micro-gap valve seat is designed to work with micro-gap valve assemblies found in high-performance homogenisers. These seats offer superior control of flow restriction and turbulence within the homogenising valve system.

Features of the SPX Flow micro-gap valve seat include:

Ultra-precise sealing surface geometry
Hard-wearing materials for extended use
Engineered flow paths for consistent pressure drop

Micro-gap designs are commonly used in dairy, pharmaceutical, and nanoparticle reduction processes.

Carbide Valve Seat SPX – High Durability Option

A carbide valve seat SPX is made from tungsten carbide or similar hard-wearing materials, offering exceptional resistance to wear, abrasion, and product impact. These are ideal for high-throughput, abrasive, or corrosive process media where steel seats would wear too quickly.

Carbide SPX valve seats are commonly found in:

Two-stage homogenisers
Abrasive product applications
Heavy-duty SPX Flow pump systems

We offer full replacement kits or individual seats depending on your maintenance needs.

SPX Impact Ring Seat – Valve Energy Absorption Interface

The SPX impact ring seat is the component that interacts with the impact ring in homogenising valves. It absorbs kinetic energy and transfers it through the valve body, ensuring the mechanical integrity of the assembly under repeated high-pressure cycles.

Correct replacement of the SPX impact ring seat ensures:

Precise sealing interface with the valve element
Extended life of the valve body and impact system
Reduced micro-fracturing and cavitation

We supply SPX impact ring seat variants for single- and two-stage heads.

SPX Valve Sealing Surface Integrity

The SPX valve sealing surface is essential for reliable pump and homogeniser operation. Surface defects such as pitting, grooves, or deformation lead to poor sealing, loss of pressure, and system inefficiency.

Signs your SPX valve sealing surface may need replacement:

Increased leakage or bypass under pressure
Visual damage or scoring on the seat
Reduced product consistency or efficiency

We recommend regular inspection of sealing surfaces during major maintenance intervals.

Replacement Valve Seat SPX – When and Why

A replacement valve seat SPX should be installed when the original seat shows visible signs of wear, impact damage, or surface erosion. Continuing to operate with a damaged seat can lead to:

Seal failure and product contamination
Increased valve element wear
Pressure loss and energy inefficiency

Bos Homogenisers offers both single seats and full replacement kits with gaskets, rings, and installation tools if required.

SPX Pump Valve Wear Seat

The SPX pump valve wear seat is a specialised insert used in suction and discharge valves within SPX high-pressure pumps. These wear seats are exposed to product flow, backpressure, and mechanical closure forces from the valve element.

Advantages of using dedicated wear seats:

Extend the life of the valve housing
Simplify maintenance and reduce downtime
Lower long-term operating costs

We stock wear seats for legacy SPX models and newer systems.

Materials and Machining Quality

SPX valve seats are manufactured from the following materials, depending on application:

Tungsten carbide for high-abrasion environments
316 stainless steel for food and dairy use
Hardened tool steel for general industrial processes

All valve seats undergo precision machining and quality control to ensure a proper seal, correct tolerances, and long operating life.

Compatible SPX Models

We supply SPX valve seats for a wide range of models, including:

SPX Flow Gaulin and APV Gaulin homogenisers
MC-series and Rannie series pumps
Custom and OEM-specified valve block designs

Unsure of the correct valve seat? Send us your serial number and operating pressure range—we’ll help you identify the exact part.

¿Por qué elegir los homogeneizadores Bos?

Bos Homogenisers is a specialist supplier of high-pressure homogeniser spare parts for SPX systems. We provide:

SPX homogenising valve seat and pump valve seat replacements
OEM-compatible parts for legacy and current models
Carbide and stainless steel variants
Fast worldwide delivery and expert technical assistance

How to Order SPX Valve Seats

Send us your machine type and serial number
Specify valve seat dimensions or part number (if known)
Receive a quote with lead time and shipping options
Worldwide dispatch from our central European warehouse

Solicitar presupuesto

If you need a SPX homogenising valve seat, SPX Flow micro-gap valve seat, or replacement valve seat SPX, contact us today for fast service and expert support.

Correo electrónico: info@boshomogenisers.com

Tel: +31 (0)123 456 789

Request a Quote for SPX Valve Seats

Piezas de recambio SPX relacionadas

¿Buscas otras piezas de recambio para homogeneizadores SPX? Echa un vistazo a nuestra gama completa de componentes de recambio SPX:

Válvulas de bomba SPX – Válvulas de las bombas de aspiración y descarga
Bloques de cilindro SPX – Bloques de cilindros de precisión
Empaquetaduras para actuadores SPX – Juntas de estanqueidad para actuadores
Bloque de cilindros SPX – Bloques de cilindros de precisión
Émbolos SPX – Émbolos de alta presión

View all SPX spare parts →

Alternativas compatibles de otras marcas

Looking for valve seats for other homogeniser brands? BOS Homogenisers supplies compatible replacements across all major brands:

Asientos de válvula del homogeneizador Bos | Asientos de válvula APV | Asiento de válvula Gaulin

Póngase en contacto