SPX-Zylinderblöcke Ersatzteile

SPX Cylinder Blocks – New & 2nd Hand Replacement Solutions

SPX cylinder blocks are core components of the liquid end in high-pressure SPX Flow homogenisers. The cylinder block houses the plunger bores and internal product channels and provides the structural foundation for consistent pressure generation. Because cylinder blocks operate under extreme cyclic loading, pressure peaks, and frequent cleaning cycles, their condition directly influences sealing performance, pressure stability, service intervals, and overall machine reliability.

Unter Bos Homogenisatoren, we supply high-quality SPX cylinder blocks for a broad range of SPX homogeniser series. Depending on availability and your maintenance strategy, we can supply New / 2nd hand cylinder blocks that are suitable for planned overhauls or urgent replacements. Our goal is simple: provide the correct cylinder block solution that fits your machine and supports stable long-term operation.

If you are searching for specific SPX cylinder block article numbers or want to verify which parts match your homogeniser, you can consult our complete spare parts overview at Zylinderteile.

What Are SPX Cylinder Blocks?

The cylinder block is the main pressure-bearing component of the liquid end assembly. It contains precisely machined bores that guide the plungers and support the sealing system. It also integrates valve chambers and product paths that connect inlet and outlet flow. In practice, the cylinder block must combine dimensional accuracy with mechanical strength to ensure reliable operation at high pressure and high duty cycles.

During operation, SPX cylinder blocks are exposed to:

• High internal hydraulic pressures and rapid pressure fluctuations
• Continuous cyclic loading from reciprocating plungers
• Thermal and chemical exposure from product and CIP processes
• Wear and erosion at critical flow and valve interfaces

Because of these conditions, cylinder block condition is a key factor in preventing leakage, reducing packing wear, and maintaining consistent homogeniser performance.

Types of SPX Cylinder Blocks

Anders Types of SPX cylinder blocks exist across the SPX Flow homogeniser portfolio. The correct selection depends on your machine series, pressure range, process requirements, and the configuration of the liquid end. Bos Homogenisers supports customers by matching the correct cylinder block execution to the machine and operating conditions.

Serienmäßige Zylinderblöcke

These cylinder blocks are typically used in industrial dairy and food applications where reliability and repeatable performance are essential. Correct machining of the plunger bores and sealing interfaces is critical to ensure stable operation and predictable service life.

Hochdruck-Zylinderblöcke

High-pressure applications require cylinder blocks that maintain dimensional stability under higher mechanical stress. Selecting the correct execution helps reduce fatigue risk and supports stable sealing performance at elevated pressure settings.

Laboratory Cylinder Blocks

Laboratory and pilot homogenisers use compact cylinder block designs optimized for smaller capacities and frequent product changes. These designs often prioritize cleanability, repeatability, and stable performance during R&D and small-batch runs.

Legacy and Cross-Compatible Cylinder Blocks

SPX Flow homogenisers include multiple legacy series, and some configurations share design principles with other widely used machine families. Where applicable, Bos Homogenisers supports identification and selection by matching critical dimensions and interfaces to ensure correct integration.

New / 2nd Hand SPX Cylinder Blocks

Maintenance strategies differ between plants. Some operators prefer new components for maximum lifetime, while others prefer high-quality refurbished options to optimize cost and lead time. Bos Homogenisers supports both approaches by offering New / 2nd hand SPX cylinder blocks depending on your needs.

New SPX Cylinder Blocks

• Suitable for long-term maintenance planning and maximum service life
• Manufactured to OEM-level dimensional requirements for correct fit
• Designed for stable sealing interfaces and consistent pressure generation

2nd Hand SPX Cylinder Blocks

• Cost-effective option for overhauls and certain replacement scenarios
• Selected and prepared to support reliable reuse where applicable
• Useful when lead time is critical and availability from stock is possible

For both options, correct specification and verification are essential. A cylinder block must match the machine configuration, sealing layout, and valve arrangement to perform reliably.

Common Wear and Failure Modes

SPX cylinder blocks can wear or degrade over time, especially in high-pressure, abrasive, or CIP-intensive duty. Typical wear and damage mechanisms include:

• Plunger bore wear that increases leakage risk and accelerates packing wear
• Surface scoring caused by contamination or worn sealing components
• Corrosion due to aggressive product media or cleaning chemicals
• Erosion at flow paths or valve interfaces in abrasive applications
• Fatigue damage under long-term cyclic loading at high pressure

Operating with a worn cylinder block often results in reduced pressure stability, shortened packing life, and a higher risk of secondary damage to plungers, packings, and valve components. Replacing or refurbishing the cylinder block at the correct time helps protect the full liquid end assembly.

Why Cylinder Block Precision Matters

Even minor deviations in bore geometry or sealing interfaces can cause misalignment and uneven loading of the packings. This leads to higher friction, increased heat, and early seal failure. A properly specified cylinder block supports:

• Stable and repeatable pressure generation
• Predictable packing service life
• Reduced leakage and lower maintenance frequency
• Consistent product flow and homogenisation results

Bos Homogenisers supports customers by providing the right cylinder block solution and guidance for correct selection based on machine series and operating conditions.

SPX-Maschinen, für die wir Ersatzteile liefern

Bos Homogenisers supplies cylinder blocks and other spare parts support for the following SPX homogeniser series:

Angebot für SPX-Zylinderblöcke anfordern

Wenn Sie auf der Suche nach SPX cylinder blocks—including New / 2nd hand options—Bos Homogenisers can support you with correct part identification and supply. To ensure the right match, please share your SPX model/series details and, where available, machine or liquid end identification information.

Kontakt BOS-Homogenisatoren für ein Angebot. Geben Sie Ihr Maschinenmodell, die Seriennummer, den Betriebsdruck und die Anwendungsdetails an. Unsere Spezialisten werden sicherstellen, dass Sie den richtigen Zylinderblock für optimale Leistung und lange Lebensdauer erhalten.

Zugehörige SPX-Ersatzteile

Suchen Sie nach weiteren Ersatzteilen für SPX-Homogenisatoren? Sehen Sie sich unser komplettes Sortiment an SPX-Ersatzteilen an:

• SPX-Zylinderblock – Präzisionszylinderblöcke
• SPX-Pumpenventile – Ventile für Saug- und Druckpumpen
• SPX-Kolbenring – Verschleißringe für Kolben
• SPX-Sicherheitsventil – Überdruckventile
• SPX Homogenisierventilteile – Ventile, Ventilsitze und Prallringe

Alle SPX-Ersatzteile anzeigen →

Kompatible Alternativen anderer Marken

Suchen Sie Zylinderblöcke für Homogenisatoren anderer Marken? BOS Homogenisers liefert kompatible Ersatzteile für alle gängigen Marken:

Rannie-Zylinderblöcke | Bos-Zylinderblöcke | Gaulin-Zylinderblöcke | APV-Zylinderblöcke

Nehmen Sie Kontakt auf