SPX:n homogenisointiventtiilin osat Varaosat

Homogenising Valve Parts SPX

Homogenising valve parts SPX are critical components in high-pressure homogenisers. These parts directly determine pressure build-up, shear intensity, particle size reduction and long-term reliability of the homogenising system.

BOS-homogenisaattoritsupplies OEM-compatible homogenising valve parts for SPX homogenisers, including plug valve systems, pilot valve configurations and microgap valve solutions.

If you are searching for specific SPX homogenising valve part article numbers or want to verify which parts match your homogeniser, you can consult our complete spare parts overview at homo-venttiilin osat tai homo-venttiilin osat.

SPX Homogenising Valve Parts for SPX Flow Homogenizers

SPX homogenising valve parts are critical components in the liquid end of SPX Flow homogenizers. The homogenising valve assembly is responsible for pressure drop, turbulence creation, and particle size reduction during the homogenisation process.

Bos Homogenisers supplies high-quality aftermarket SPX homogenising valve parts compatible with SPX Gaulin, SPX Rannie, and SPX industrial series machines. We also support systems operating with SS plungers, chrome coated plunger, inchromated plungers, ceramic plungers, and TC plungers, ensuring complete liquid end compatibility.

SPX Machines for Which We Deliver Homogenising Valve Parts

BOS Homogenisers supplies homogenising valve parts and spare parts for the following SPX homogeniser series:

What Are SPX Homogenising Valve Parts?

The homogenising valve assembly creates the pressure drop that enables particle size reduction. It converts hydraulic energy into mechanical shear forces through impact, cavitation, and turbulence.

A complete SPX homogenising valve assembly typically consists of:

• Valve seat
• Valve impact head
• Valve guide
• Springs and retainers
• Hydraulic or manual actuation components

Correct interaction between the valve system and the plunger system—whether using MC model plunger, Rannie model plunger, or BOS type plunger configurations—is essential for stable pressure control and optimal homogenisation performance.

Materials for SPX Homogenising Valve Parts

Valve components are exposed to extreme pressure, impact forces, and product abrasion. For this reason, material selection is critical.

• Tungsten carbide (TC) – Maximum wear resistance for abrasive products
• Stellite – High hardness and corrosion resistance
• Hardened stainless steel – Suitable for standard food applications
• Ceramic components – Excellent chemical resistance and durability

When operating with TC plungers or ceramic plungers, matching valve seat materials is important to prevent uneven wear.

SPX Single-Stage and Two-Stage Valve Systems

SPX homogenizers are available with:

• Single-stage homogenising valves
• Two-stage homogenising valves (primary + secondary stage)
• Hydraulic actuation systems (HVA)
• Automatic hydraulic systems (AHS)

Proper valve adjustment ensures consistent pressure generation from the plunger system, whether operating with SS plungers, inchromated plungers, or chrome coated plunger configurations.

Wear Mechanisms in SPX Homogenising Valve Parts

Common wear mechanisms include:

• Impact erosion at the valve seat
• Abrasive wear from product particles
• Cavitation damage
• Corrosion from cleaning chemicals

Operating with worn valve parts increases load on the plunger system and may shorten the life of MC model plunger, Rannie model plunger, and BOS type plunger components.

When to Replace SPX Homogenising Valve Parts

Replacement is recommended when you observe:

• Paineen epävakaus
• Reduced homogenisation efficiency
• Increased vibration or noise
• Visible wear on seat or impact head

Timely replacement prevents secondary damage to cylinder blocks, packings, and plunger assemblies.

Complete SPX Valve Overhaul Kits

Bos Homogenisers supplies complete SPX homogenising valve overhaul kits including:

• Valve seat
• Impact head
• Guide components
• Springs
• Sealing components

All parts are manufactured to OEM tolerances and matched to machine serial numbers.

Aftermarket SPX Homogenising Valve Parts – Reliable and Cost-Effective

Our aftermarket SPX valve parts offer:

• OEM-level dimensional accuracy
• High-grade wear-resistant materials
• Compatibility with SPX MC, G, R and Industrial series
• Nopea toimitus maailmanlaajuisesti
• Support for discontinued SPX models

Whether your system operates with ceramic plungers, TC plungers, or standard SS plungers, we ensure correct valve-plunger compatibility.

Miksi valita Bos-homogenisaattorit?

• 75+ years of homogenisation expertise
• Extensive stock of SPX-compatible spare parts
• Technical support for part identification
• Support for MC model plunger, Rannie model plunger and BOS type plunger systems
• Global delivery and fast response

Contact Bos Homogenisers for technical assistance, quotations, or full SPX homogenising valve overhaul solutions.

Technical Support for SPX Homogenising Valve Parts

For assistance selecting plug valve, pilot valve, knife edge or microgap valve configurations — including ceramic valve, stellite valve and TC valve executions — contact BOS-homogenisaattorit.

We also provide complete homogeniser overhaul and maintenance services for SPX homogenisers.

Liittyvät SPX-varaosat

Etsitkö muita SPX-homogenisaattorin varaosia? Tutustu kattavaan SPX-varaosavalikoimaamme:

• SPX-pumpun venttiilit – Imu- ja poistopumppujen venttiilit
• SPX-sylinterilohkot – Tarkkuussylinterilohkot
• SPX-toimilaitteiden tiivisteet – Toimilaitteiden tiivisteet
• SPX-sylinterilohko – Tarkkuussylinterilohkot
• SPX-mäntäventtiilit – Korkeapainemäntä

Katso kaikki SPX-varaosat →

Yhteensopivat vaihtoehdot muilta tuotemerkeiltä

Etsitkö homogenointiventtiilin osia muihin homogenisaattorimerkkeihin? BOS Homogenisers toimittaa yhteensopivia varaosia kaikkiin tärkeimpiin merkkeihin:

Rannie-homogenisointiventtiilin osat | Bos-homogenointiventtiilin osat | APV-homogenisointiventtiilin osat

Ota yhteyttä